Rispri LabsENGINEERING A CIRCULAR FUTURE

WATER TESTING AND PURE WATER / 06

Ready: level 7 of 9Tested in the fieldHospital

Water plant for dialysis made in India.
Pure water for dialysis, made in India.

A dialysis centre relies on an imported water system that is costly to run and slow to repair. A compact membrane plant makes very pure water for dialysis, built to replace imported units.

VERY PURE WATER FOR DIALYSIS AND LABSDelivered by Rispri Labs
Very pure water for dialysis and labs
Very pure water for dialysis and labs

What it achieves

The key numbers.

Below 1 µS/cm

water purity.

About 10 paise

per litre.

100 to 500 L/h

sizes.

Problem and fix

The problem this solves.

  1. 01
    The problem

    A dialysis centre relies on an imported water system that is costly to run and slow to repair.

    How it is fixed

    A compact membrane plant makes very pure water for dialysis, built to replace imported units.

How it works

Step by step.

  1. 1

    Pre-treat

    Feed water is softened and filtered.

  2. 2

    Purify

    Membranes remove salts and germs.

  3. 3

    Supply

    Pure water goes to the dialysis machines.

Key features

Why it works well.

Water purity below 1 µS/cm at about 10 paise a litre. 100 to 500 litres an hour.

  • Lower costFar cheaper than imported units.
  • Low upkeepNo costly annual service contract.
  • Many usesDialysis, saline, labs and biotech.

At a glance

The details.

Output100 to 500 litres an hour
PurityBelow 1 µS/cm (Type 2 water)
Running costAbout 10 paise a litre
Indicative costAbout INR 2.5 to 3 lakh
Ready levelLevel 7 of 9 (tested in the field)
ScaleHospital

Costs are indicative and change with your water, site and plant size. We confirm them after testing a sample.

Where it is used

Who it is for.

  • Dialysis centres
  • Hospitals
  • Laboratories

Questions

Frequently asked questions.

Is this technology proven?

Yes. It is at ready level 7 of 9, which means: tested in the field. Water purity below 1 µS/cm at about 10 paise a litre. 100 to 500 litres an hour.

What does it cost to run?

About about 10 paise a litre. The exact figure depends on your water and the size of the plant. We confirm it after testing a sample.

Can we try it on our own water first?

Yes. We test a sample in our NABL-accredited lab and, where it helps, run a small trial on your site before you invest in a full plant.

Do you supply and install it?

Yes. We design, supply, install and start up the system, train your staff, and our lab checks the treated water.

THE NEXT STEP

Fix it on
your own site.

Send us a water sample or a test report. We will check it, confirm this method fits and tell you what it costs to run.

Discuss your problem