SALTY WATER, RO AND MEMBRANES / 02
Solar-powered salt removal that keeps minerals.
Desalting water with sunlight, and keeping the minerals.
The water is salty, but RO removes all the good minerals and wastes too much water. Instead of pushing water through a membrane, a small electric current pulls the salt out of the water.

What it achieves
The key numbers.
of drinking water.
per litre to desalt.
powered.
Problem and fix
The problem this solves.
- 01The problem
The water is salty, but RO removes all the good minerals and wastes too much water.
How it is fixedInstead of pushing water through a membrane, a small electric current pulls the salt out of the water. It runs on solar panels and leaves healthy minerals in.
How it works
Step by step.
- 1
Feed
Salty water flows between special membranes.
- 2
Pull
A small electric current from solar panels pulls salt out.
- 3
Balance
Some healthy minerals are left in on purpose.
- 4
Report
Sensors send water quality readings online.
Key features
Why it works well.
500 to 1,000 litres an hour. Sends water quality readings online.
- Less waste than ROMore of the water becomes drinking water.
- Healthy mineralsWater is not stripped bare.
- Off-gridRuns on solar power.
- Membranes made in IndiaSpares are easier to get.
At a glance
The details.
| Output | 500 to 1,000 litres an hour |
|---|---|
| Removes | Salt |
| Power | Solar |
| Running cost | Under 5 paise a litre |
| Ready level | Level 9 of 9 (already in use) |
| Scale | Village or hospital |
Costs are indicative and change with your water, site and plant size. We confirm them after testing a sample.
Where it is used
Who it is for.
- Villages with salty groundwater
- Hospitals
- Desert and coastal areas
Questions
Frequently asked questions.
Is this technology proven?
Yes. It is at ready level 9 of 9, which means: already in use. 500 to 1,000 litres an hour. Sends water quality readings online.
What does it cost to run?
About under 5 paise a litre. The exact figure depends on your water and the size of the plant. We confirm it after testing a sample.
Can we try it on our own water first?
Yes. We test a sample in our NABL-accredited lab and, where it helps, run a small trial on your site before you invest in a full plant.
Do you supply and install it?
Yes. We design, supply, install and start up the system, train your staff, and our lab checks the treated water.
Salty water, RO plants and membranes
Other ways to fix this problem.
THE NEXT STEP
Fix it on
your own site.
Send us a water sample or a test report. We will check it, confirm this method fits and tell you what it costs to run.
Discuss your problem