Rispri LabsENGINEERING A CIRCULAR FUTURE

PROVEN TECHNOLOGIES

87 technologiesReady level 6 to 96 segments

Proven ways to fix
common water problems.

Find the problem you are facing. See how it is fixed and what the method has already achieved. Every method here has been tested in real conditions, and most are already in use.

PROVEN TECHNOLOGIESDelivered by Rispri Labs
Water treatment plant
All technologies

Start with your problem

Six areas. One place to start.

Each technology starts with a problem you may recognise. Its page explains, in plain words, how it works, what it has achieved, what it costs to run and who it is for. We test your water in our NABL-accredited lab, pick the methods that fit, try them on a small scale if needed, then build the plant.

Level 9
Already in use
Level 8
Finished and proven
Level 7
Tested in the field
Level 6
Working model tested in real conditions
01 / 18 technologiesSafe drinking waterWays to make borewell, hand pump and surface water safe to drink, from a filter for one home to a plant for a whole village. Most need no electricity.Arsenic and fluoride in borewell water · Yellow water, iron and muddy water · Killing germs without chlorine cylinders02 / 11 technologiesSalty water, RO and membranesWays to desalt water while wasting less of it, keep RO plants running, make membranes locally and recover water from RO reject.Salty water, RO plants and membranes03 / 18 technologiesIndustrial wastewater and ZLDWays to clean tough factory wastewater that fails COD limits, smells or leaves heaps of sludge, and to reach zero liquid discharge at lower cost.Factory wastewater that fails COD, smells or makes too much sludge04 / 15 technologiesResource recovery and waste to valueWays to turn waste into money: clean salt from ZLD, solvents and metals from wastewater, fertiliser from ash, and fuel and heat from waste.Getting salt, solvents and metals back from wastewater · Water treatment materials made from waste05 / 16 technologiesSewage, drains and water bodiesWays to treat sewage without a big plant or sewer line, clean open drains and ponds, stop water loss and keep workers out of septic tanks.Sewage, bath water and open drains · Green, smelly ponds and fish ponds · Leaking water tanks and ponds06 / 9 technologiesWater testing and pure waterWays to test water on the spot, monitor it remotely, and make very pure water for dialysis, labs and industry.Testing water on the spot · Very pure water for dialysis and labs

Questions

Frequently asked questions.

What does the ready level mean?

It shows how far a technology has come, on a scale of 1 to 9. Level 6 means a working model has been tested in real conditions. Level 7 means it has been tested in the field. Level 8 means the finished system is proven. Level 9 means it is already in use. This page only shows levels 6 to 9.

How do I choose the right one?

Start by testing your water. Our NABL-accredited lab checks the sample. Then our engineers pick the methods that suit your problem, the amount of water, your budget and your site.

Can I try it before building a full plant?

Yes. Most of these can be tried on a small scale with your own water first. You see the results before you spend money on a full plant.

Do you supply and install these?

Yes. We design, supply, install and start up the plant, train your staff, and our lab checks the treated water.

THE NEXT STEP

Have a problem
that is not listed?

Send us a water sample or a test report. We will tell you which method fits, what it costs to run, and whether to try it small first.

Discuss your problem